Better Chemistry from Intelligent Flash Purification

Dedicated to Science, Dedicated to You

We have all been there: You want to do a simple Flash purification.

Easy, right?

You then begin to prepare your reaction mixture, think about monitoring the reaction, confirming the product, developing the Flash method…

This post highlights some ways to make Flash purification easier than ever before. Read on for tips on reaction monitoring, purification and fraction ID.

<<click infographic to zoom>>

 

Pre-Flash Run: Performing (and monitoring) your reaction
Starting off you are faced with several decisions to make – decisions that can turn the simple purification process in to a half-day adventure in sample preparation and scrolling through social media while you wait for your LC/MS results.

The first decision you need to make is how you can quickly and easily make your compound and get that compound over to the Flash system. Pronto!

Tip #1: Reduce wait times.
If you think, “LC/MS is best!” you may want to reconsider. Reaction monitoring can be done much faster and easier using alternative technologies like TLC. Consider what you truly need – a quick answer to, ‘Did I make my compound?” Seek to find that answer in the easiest way possible, using the most straightforward (even basic) technology that you have on hand in your lab.

Tip #2: Reduce your sample preparation.
If you choose to use the TLC route over LC/MS (Bravo!) to monitor the reaction, you’ll still have a few steps between you and the Flash run. Namely, the annoyance of scraping spots, preparing them in a solvent for direct injection in to the mass spectrometer. It may be an opportunity to explore additional technologies available on the market, such as a TLC Plate Reader. This newer technology gives you push-button analysis of TLC plates. No scraping. No sample prep. No cleanup. Just results in seconds.

Imagine – your reaction complete and your compound of interest identified with only the push of a button!

<<click here for more information on reaction monitoring from Advion>>


During the Flash Run: Use the Tools at Hand
The nice thing is that (generally) technology is on our side. Thanks to AI and auto-runs and the ‘set-it-and-forget-it’ mentality of several tedious chemistry processes, we have luckily evolved to a time where many industry-leading experts have done the work for you.

Tip #3: Simplify Flash method development.
Several questions come up during method development in Flash that, unless you are an expert, you may not know definitively. What are your Rf values? Which column should you choose? If your Flash system offers the ability to simplify method development with suggested details, it is a good starting point and can help your routine purification run smoothly.

<<click here for more information on intelligent flash purification from Advion x interchim>>


After the Flash Run: Identifying Fractions

You’ve made it though your purification and feel confident about the work you put in so far. Hopefully you spent no time at all monitoring your reaction and preparing your method, and you feel confident that you let the Flash system help with method development. But what now? Is it finally time to dust off the old LC/MS?

Tip #4: Simplify Fraction ID
There is not one way to ID a compound. As we learned before, TLC is an ideal alternative to LC/MS for reaction monitoring. Now, we look at it from a different angle – how to quickly ID the fractions in your tubes without wasting any of your precious time?

Tools like the Advion ASAP liquids and solids probe are ideal fo this. The simple probe is dipped in to one of the tubes and then inserted in to the APCI ion source of the mass spec. This allows for prep-free sampling – and another way to skip the LC/MS.

<<click here for more information about the ASAP probe from Advion>>

Have any tips (or headaches) to add to this list? Email us, info@advion.com and make yourself known! We are happy to connect you with a Flash expert on our team.

Interested in a streamlined TLC to Flash to ASAP workflow system? Advion x Interchim is currently offering a free Flash system with the purchase of a mass spectrometer. Click here to learn more about the latest special offers.

Video more your style? Watch a full Flash workflow, from reaction to fraction in our latest clip: